Crosby® G-2150 Bolt Type Chain Shackle
Note: This message box will not appear on your live site
The Size Guide Button above will appear if a Size Guide is activated for a product with the Pop-Up display option selected.
Click here and select Manage Size Guides to create and customize size guides for your products in just a few steps!
To edit the design of your Size Guide Pop-Up, select Size Chart under Pages in the top-left page selector.
Crosby shackles can be furnished proof tested with certificates to designated standards, such as: ABS, DNV, Lloyds or other certification. Charges for proof testing and certification are available when requested at the time of order. The shackles are quenched and tempered and can meet DNV impact requirements of 42 joules at -20 degrees C. Crosby products meet or exceed all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. They meet other critical performance requirements including fatigue life, impact properties and material traceability not addressed by ASME B30.26.
- Working Load Limit and Grade 6 permanently shown on every shackle.
- Forged, Quenched & Tempered, with alloy pins.
- Hot-dip galvanized. 85 ton shackles have hot-dip galvanized bows and the bolts are Dimetcoted® and painted red.
- Sizes 3/8 inch and below are mechanically galvanized.
- Fatigue rated to 20,000 cycles at 1-1/2 times the Working Load Limit. (1/2t - 55t).
- Approved for use at -40° F (-40° C) to 400° F (204° C).
- Meets or exceeds all requirements of ASME B30.26.
- Sizes 1/2 - 25t meet the performance requirements of EN13889:2003.
- Shackles 55 metric tons and smaller can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification when requested at time of order.
- Type Approval certification in accordance with ABS Marine Vessel Rules, ABS Mobile Offshore Units, and ABS Guide for the Certification of Lifting Appliances available. Certificates available when requested at time of order and may include additional charges.
- Meets the performance requirements of Federal Specification RR-C-271, Type IVB, Grade A, Class 3, except for those provisions required of the contractor.
- All 2150 shackles can meet charpy requirements of 31 ft-lb (42 Joules) avg at -4° F (-20° C) upon special request.
- Look for the Red Pin®... the mark of genuine Crosby quality.
